A Raman spectroscopy study of bicarbonate effects on UO

McGrady, J.; Kumagai, Yuta; Watanabe, Masayuki; Kirishima, Akira*; Akiyama, Daisuke*; Kimuro, Shingo; Ishidera, Takamitsu

Journal of Nuclear Science and Technology, 60(12), p.1586 - 1594, 2023/12

https://doi.org/10.1080/00223131.2023.2236104

Synergistic effect of aluminum lactate and sodium molybdate on freshwater corrosion of carbon steel under irradiation

Otani, Kyohei; Kato, Chiaki; Igarashi, Takahiro

Corrosion, 79(11), p.1277 - 1286, 2023/11

https://doi.org/10.5006/4386

Quantitative evaluation of long-term state changes of contaminated reinforced concrete considering the actual environments for rational disposal (Contract research); FY2021 Nuclear Energy Science & Technology and Human Resource Development Project

Collaborative Laboratories for Advanced Decommissioning Science; The University of Tokyo*

JAEA-Review 2022-057, 98 Pages, 2023/02

JAEA-Review-2022-057.pdf:8.5MB

The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2021. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2020, this report summarizes the research results of the "Quantitative evaluation of long-term state changes of contaminated reinforced concrete considering the actual environments for rational disposal" conducted in FY2021. The present study aims to construct a database for quantitative prediction of contaminated reinforced concrete inside the reactor building. In FY2021, data on deformation and water movement caused by drying and reabsorption of mortar were obtained to evaluate the mesoscale cracking behavior of concrete. A rigidbody spring model was used to develop a program that can consider changes in concrete age and temperature, water, and stress conditions. To evaluate the long-term penetration behavior of radionuclides into the factual matrix, data on sorption …

A New approach to extracting biofilm from environmental plastics using ultrasound-assisted syringe treatment for isotopic analyses

Battulga, B.; Atarashi-Andoh, Mariko; Nakanishi, Takahiro; Koarashi, Jun

Science of the Total Environment, 849, p.157758_1 - 157758_11, 2022/11

https://doi.org/10.1016/j.scitotenv.2022.157758

Characterizing plastic-associated biofilms is key to the better understanding of organic material and mineral cycling in the "Plastisphere"-the thin layer of microbial life on plastics. In this study, we propose a new method to extract biofilms from environmental plastics, in order to evaluate the properties of biofilm-derived organic matter through stable carbon (C) and nitrogen (N) isotope signatures and their interactions with radionuclides especially radiocesium (Cs). After ultrasound-assisted separation from the plastics, biofilm samples were successfully collected via a sequence of syringe treatments. Biofilm-derived organic matter samples (14.5-65.4 mg) from four river mouths in Japan showed Cs activity concentrations of 75 to 820 Bq kg biofilm (dw), providing evidence that environmental plastics, mediated by developed biofilms, serve as a carrier for Cs in the coastal environment. Significant differences in the (C and N signatures were also obtained for the biofilms, indicating the different sources, pathways, and development processes of biofilms on plastics.

Data comparison of measurement of carbon isotope standards between JAEA-AMS-TONO and JAEA-AMS-MUTSU

Kokubu, Yoko; Matsubara, Akihiro; Fujita, Natsuko; Kuwabara, Jun; Kinoshita, Naoki

JAEA-Technology 2021-028, 33 Pages, 2022/02

JAEA-Technology-2021-028.pdf:2.18MB

Japan Atomic Energy Agency (JAEA) has two facilities of accelerator mass spectrometry, JAEA-AMS-TONO and JAEA-AMS-MUTSU at Tono Geoscience Center and Aomori Research and Development Center, respectively. In this report, characteristics of each facility and results of standard samples in the inner-comparison test of carbon isotope measurement will be described. Both facilities have been used for research by not only JAEA's staff but also researchers who belong to universities and other institutes on the shared use program of JAEA facilities. Recently, researchers trend to use both facilities with the expansion of demand for the carbon isotope measurement by using the accelerator mass spectrometer (AMS). However, each facility has a spectrometer made by a different manufacturer and equipped with different mechanical components. There is a difference in each ability to the carbon isotope measurement such as background level. This is, for example, due to different ion injection system adapted at each spectrometer. Further, each facility uses a different analytical method adjusted to each main research field. When a researcher uses both facilities, the researcher understands more about the characteristics and need to make a suitable choice of a facility for samples and the analytical method. The report presents a detailed information of characteristics of the spectrometer, sample preparation method and analytical method, and of ability of the measurement based on the inner-comparison test.

Quantitative evaluation of long-term state changes of contaminated reinforced concrete considering the actual environments for rational disposal (Contract research); FY2020 Nuclear Energy Science & Technology and Human Resource Development Project

Collaborative Laboratories for Advanced Decommissioning Science; The University of Tokyo*

JAEA-Review 2021-047, 127 Pages, 2022/01

JAEA-Review-2021-047.pdf:5.57MB

The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2020. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2020, this report summarizes the research results of the "Quantitative evaluation of long-term state changes of contaminated reinforced concrete considering the actual environments for rational disposal" conducted in FY2020. The present study aims to construct a database for quantitative prediction of contaminated reinforced concrete inside the reactor building. In FY2020, in chapter 3.1, in order to obtain the data for the evaluation of mesoscale cracking behavior, the equipment for the making and the measurement of the test specimens were prepared, the evaluation method was confirmed, and preliminary experiments were carried out.

Preparation of carbonate slurry simulating chemical composition of slurry in overflowed high integrity container and evaluation of its characteristics

Horita, Takuma; Yamagishi, Isao; Nagaishi, Ryuji; Kashiwaya, Ryunosuke*

JAEA-Technology 2021-012, 34 Pages, 2021/07

JAEA-Technology-2021-012.pdf:2.1MB
JAEA-Technology-2021-012(errata).pdf:0.18MB

Waste mainly consisting of carbonate precipitates (carbonate slurry) from the Advanced Liquid Processing System (ALPS) and the improved ALPS at the Fukushima Daiichi Nuclear Power Station of Tokyo Electric Power Holdings, Inc. have been storing in the High Integrity Container (HIC). The supernatant solution of carbonate slurry contained in some of HICs were overflowed in April of 2015. The all of level of liquid in the HICs were investigated; however, almost of the HICs were under the level of overflow. The mechanism of overflow suggested to be depending on the difference of the properties of the carbonate slurry such as the retention/release characteristics of the bubbles. Therefore, in order to clarify the mechanism of leakage, the repeatability experiment was carried out by using simulated carbonate slurry. The simulated carbonate slurry was perpetrated by using the same cross-flow filter system of the actual ALPS. Moreover, the preparative conditions for the simulated carbonate slurry were the same as Mg/Ca concentration ratio in inlet water of the ALPS (raw water) and the ALPS operating conditions. The chemical characteristics of simulated carbonate slurries were revealed by ICP-AES, pH meter, etc. The density of the settled slurry layer tended to increase depending on the calcium concentration in the raw water. The bubble injection test was conducted in order to investigate the bubble retention/release behavior in the simulated carbonate slurry layer. The simulated carbonate slurry with high settling density, which was generated by high calcium concentration solution was revealed to retain the injected bubbles. Since the ratio of concentration calcium and magnesium during the carbonate slurry generation is assumed to affect the retention of bubbles in the slurry layer, the information on the composition of raw water is one of important factor for overflow of HICs.

Incorporation of U, Pb and rare earth elements in calcite through crystallisation from amorphous calcium carbonate; Simple preparation of reference materials for microanalysis

Miyajima, Yusuke*; Saito, Ayaka*; Kagi, Hiroyuki*; Yokoyama, Tatsunori; Takahashi, Yoshio*; Hirata, Takafumi*

Geostandards and Geoanalytical Research, 45(1), p.189 - 205, 2021/03

https://doi.org/10.1111/ggr.12367

Uncertainty for elemental and isotopic analyses of calcite by LA-ICP-MS is largely controlled by the homogeneity of the reference materials (RMs) used for normalization and validation. In order to produce calcite RMs with homogeneous elemental and isotopic compositions, we incorporated elements including U, Pb, and rare earth elements into calcite through heat- and pressure-induced crystallization from amorphous calcium carbonate that was precipitated from element-doped reagent solution. X-ray absorption spectra showed that U was present as U(VI) in the synthesized calcite, probably with a different local structure from that of aqueous uranyl ions. The uptake rate of U by our calcite was higher in comparison to synthetic calcite of previous studies. Variations of element mass fractions in the calcite were better than 12% 2RSD, mostly within 7%. The Pb/Pb ratio in the calcite showed 1% variations, while the U/Pb ratio showed 3-24% variations depending on element mass fractions. Using the synthetic calcite as primary RMs, we could date a natural calcite RM, WC-1, with analytical uncertainty as low as 3%. The method presented can be useful to produce calcite with controlled and homogeneous element mass fractions, and is a promising alternative to natural calcite RMs for U-Pb geochronology.

A Proposed method to discriminate a gas derived from deep underground by focusing on the relationship between changes in methane and carbon dioxide concentrations in the atmosphere

Miyakawa, Kazuya; Shimo, Michito*; Niwa, Masakazu; Amano, Kenji; Tokunaga, Tomochika*; Tonokura, Kenichi*

Fukada Chishitsu Kenkyujo Nempo, (22), p.139 - 153, 2021/00

no abstracts in English

Development of laser cutting technology of thick steel plates for nuclear facilities

Tamura, Koji*; Toyama, Shinichi

Nihon Genshiryoku Gakkai-Shi ATOMO, 62(5), p.268 - 271, 2020/05

The laser cutting technology is expected to be a promising candidate for the decommissioning measure of nuclear facilities, because it has a lot of advantage such as its high controllability and excellent suitability to remote handling by robot arm, etcetera. This report describes the recent result from laser cutting technology development for thick steel materials summarizing the cutting demonstration of 300 mm thick steels and dummy pressure vessel, the analysis of cutting condition of thick steel cutting, the observation of cutting process, remote controlled cutting system, the cutting in pile of steels by the system, and countermeasure for fume produce by cutting process.